Best Management Practices Manual

The intent of the Stormwater Best Management Practices Manual is to provide guidance on BMP selection, design, and implementation to plan submitters, reviewers, construction site operators, and site inspectors. There are also guidance materials for activities at commercial and industrial facilities. The ultimate goal of this manual and program is clean water and reduction of pollutants associated with urban activities.

View Manual by Section:

• Table of Contents
• Section 1: Introduction
• Section 2: Stormwater Management Requirements
• Section 3: Stormwater Design Facts
• Appendices

Appendix A: Ordinances
Appendix B: City of Shelbyville Boundary Map
Appendix C: Definitions, Abbreviations and Acronyms
Appendix D: Standard EPSC Plot Plans
Appendix E: Example Inspection Reports
Appendix F: EPSC Qualified Inspector Forms
Appendix G: SWQMP Checklists
Appendix H: Example O & M Plans

• Complete Manual
Printable Cover (Spine for binder)

Stormwater Best Management Practices Manual: Section 1

Section 1: Introduction

1.1 Purpose
1.2 Goals of the Program
1.3 How to use this Manual

Fact sheet components
BMP symbols

Stormwater Best Management Practices Manual: Section 2

Section 2: Stormwater Management Requirements

2.1 Coordinating with other Agencies
2.2 Regulations

2.2.1 Waterway buffers
2.2.2 Erosion Prevention and Sediment Control Requirements
2.2.3 NPDES Phase II EPSC Requirements
2.2.4 Complying with KYR10 and the City of Shelbyville’s Stormwater Requirements
2.2.5 EPSC Plan Requirements

2.3 Inspections by EPSC Qualified Contractor
2.4 SWPPP vs. ESPC Plan Vs. Stormwater Management Plan
2.5 Stormwater Management Plan

2.5.1 Stormwater Quantity Management Goals
2.5.2 Stormwater Quantity Management Performance Standards
2.5.3 Stormwater Quality Program Rationale
2.5.4 Stormwater Quality Management Plan
2.5.5 Stormwater Management Plan Submittal Requirements
2.5.6 As-Built Certifications and Inspections
2.5.7 Bonds for Stormwater Management BMPs
2.5.8 Operation and Maintenance Plan

2.6 Stormwater Quality Treatment

2.6.1 Structural Stormwater Quality Treatment Design
2.6.2 Choosing the Right Permanent Treatment Practice (PTP)
2.6.3 Weighted Total Suspended Soil (TSS) Reduction
2.6.4 Redevelopment Stormwater Quality Treatment Strategies
2.6.5 Hot Spot Landuse Treatment Requirements

2.7 Approval and Design of Manufactures Stormwater Treatment Devices

2.7.1 Approval of Manufactured Treatment Devices
2.7.2 Design of Manufactured Treatment Devices

Stormwater Best Management Practices Manual: Section 3

Section 3: Stormwater Design Facts

3.1 Erosion Prevention and Sediment Control Fact Sheets (EPP)
3.2 Sediment Control Practices Fact Sheets (SMP)
3.3 Good Housekeeping Fact Sheets (GHP)
3.4 Post Construction Stormwater Control Fact Sheets (PTP)
3.5 Residential Pollution Prevention Fact Sheets (RHP)

Stormwater Best Management Practices Manual: Appendices

Section 4: Appendices

A. Ordinances
B: City of Shelbyville Boundary Map
C: Definitions, Abbreviations and Acronyms
D: Standard EPSC Plot Plans
E: Example Inspection Reports
F: EPSC Qualified Inspector Forms
G: SWQMP Checklists

– SWQMP Statement
– As-Built Checklist

H: Example O & M Plans

Comments are closed.